网络命名空间

概念

网络命名空间有什么能力？

隔离网络设备、协议栈、端口等

Linux中，网络命名空间可以被认为是隔离的拥有单独网络栈（网卡、路由转发表、iptables）的环境。 网络命名空间经常用来隔离网络设备和服务，只有拥有同样网络命名空间的设备，才能看到彼此。

  • 从逻辑上说，网络命名空间是网络栈的副本，有自己的网络设备、路由选择表、邻接表、Netfilter表、网络套接字、网络procfs条目、网络sysfs条目和其他网络资源。

  • 从系统的角度来看，当通过clone()系统调用创建新进程时，传递标志CLONE_NEWNET将在新进程中创建一个全新的网络命名空间。

  • 从用户的角度来看，我们只需使用工具ip（package is iproute2）来创建一个新的持久网络命名空间

veth-pair介绍

veth-pair是什么?

顾名思义，veth-pair就是一对的虚拟设备接口，和tap/tun设备不同的是，它都是成对出现的。 一端连着协议栈，一端彼此相连着。如下所示:

+-------------------------------------------------------------------+
|                                                                   |
|          +------------------------------------------------+       |
|          |             Newwork Protocol Stack             |       |
|          +------------------------------------------------+       |
|                 ↑               ↑               ↑                 |
|.................|...............|...............|.................|
|                 ↓               ↓               ↓                 |
|           +----------+    +-----------+   +-----------+           |
|           |  ens33   |    |   veth0   |   |   veth1   |           |
|           +----------+    +-----------+   +-----------+           |
|192.168.235.128  ↑               ↑               ↑                 |
|                 |               +---------------+                 |
|                 |            10.10.10.2     10.10.10.3            |
+-----------------|-------------------------------------------------+
                  ↓
            Physical Network

veth设备的特点

  • veth和其它的网络设备都一样，一端连接的是内核协议栈
  • veth设备是成对出现的，另一端两个设备彼此相连
  • 一个设备收到协议栈的数据发送请求后，会将数据发送到另一个设备上去

正因为有这个特性，它常常充当着一个桥梁，连接着各种虚拟网络设备，典型的例子如下：

  • 两个net namespace之间的连接
  • Bridge、OVS之间的连接
  • Docker容器之间的连接

不同网络命名空间之间联通方案

OVS是第三方开源的虚拟交换机，功能比Linux Bridge要更强大

  • veth-pair在虚拟网络中充当着桥梁的角色，连接多种网络设备构成复杂的网络。

  • veth-pair三个网络联通方案：直接相连、通过Bridge相连和通过OVS相连

直连

直接相连是最简单的方式，如下图，一对veth-pair直接将两个namespace连接在一起

创建测试用net命名空间

ip netns a ns0
ip netns a ns1

添加veth0和veth1设备，并配置veth0 IP地址，分别加入不同net命名空间

# 创建veth-pair对
ip link add veth0 type veth peer name veth1
# 分别加入不同命名空间
ip l s veth0 netns ns0
ip l s veth1 netns ns1
# 配置ip地址，并启用
ip netns exec ns0 ip a a 10.10.10.2/24 dev veth0
ip netns exec ns0 ip l s veth0 up
ip netns exec ns1 ip a a 10.10.10.3/24 dev veth1
ip netns exec ns1 ip l s veth1 up

互ping

[root@localhost ~]# ip netns exec ns0 ping -c 4 10.10.10.3
PING 10.10.10.3 (10.10.10.3) 56(84) bytes of data.
64 bytes from 10.10.10.3: icmp_seq=1 ttl=64 time=0.045 ms
64 bytes from 10.10.10.3: icmp_seq=2 ttl=64 time=0.090 ms
64 bytes from 10.10.10.3: icmp_seq=3 ttl=64 time=0.045 ms
64 bytes from 10.10.10.3: icmp_seq=4 ttl=64 time=0.106 ms

--- 10.10.10.3 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3030ms
rtt min/avg/max/mdev = 0.045/0.071/0.106/0.028 ms

[root@localhost ~]# ip netns exec ns1 ping -c 4 10.10.10.2
PING 10.10.10.2 (10.10.10.2) 56(84) bytes of data.
64 bytes from 10.10.10.2: icmp_seq=1 ttl=64 time=0.142 ms
64 bytes from 10.10.10.2: icmp_seq=2 ttl=64 time=0.118 ms
64 bytes from 10.10.10.2: icmp_seq=3 ttl=64 time=0.104 ms
64 bytes from 10.10.10.2: icmp_seq=4 ttl=64 time=0.054 ms

--- 10.10.10.2 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3009ms
rtt min/avg/max/mdev = 0.054/0.104/0.142/0.033 ms

清除net命名空间

ip netns del ns0
ip netns del ns1

通过Bridge相连

当必须连接两个以上的net命名空间(或KVM或LXC实例)时，应使用交换机。 Linux提供了著名的Linux网桥解决方案。

Linux Bridge相当于一台交换机，可以中转多个namespace的流量， 如下图，两对veth-pair分别将两个namespace连到Bridge上。

创建net命名空间

# add the namespaces
ip netns add ns1
ip netns add ns2
ip netns add ns3

创建并启用网桥

# create the switch
yum install bridge-utils -y
BRIDGE=br-test
brctl addbr $BRIDGE
brctl stp   $BRIDGE off
ip link set dev $BRIDGE up

创建三对veth-pair

ip l a veth0 type veth peer name br-veth0
ip l a veth1 type veth peer name br-veth1
ip l a veth2 type veth peer name br-veth2

分别将三对veth-pair加入三个net命名空间和br-test

ip l s veth0 netns ns1
ip l s br-veth0 master br-test
ip l s br-veth0 up

ip l s veth1 netns ns2
ip l s br-veth1 master br-test
ip l s br-veth1 up

ip l s veth2 netns ns3
ip l s br-veth2 master br-test
ip l s br-veth2 up

配置三个ns中的veth-pair的IP并启用

ip netns exec ns1 ip a a 10.10.10.2/24 dev veth0
ip netns exec ns1 ip l s veth0 up

ip netns exec ns2 ip a a 10.10.10.3/24 dev veth1
ip netns exec ns2 ip l s veth1 up

ip netns exec ns3 ip a a 10.10.10.4/24 dev veth2
ip netns exec ns3 ip l s veth2 up

互ping

[root@localhost ~]# ip netns exec ns1 ping -c 1 10.10.10.3
PING 10.10.10.3 (10.10.10.3) 56(84) bytes of data.
64 bytes from 10.10.10.3: icmp_seq=1 ttl=64 time=0.103 ms

--- 10.10.10.3 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.103/0.103/0.103/0.000 ms

[root@localhost ~]# ip netns exec ns1 ping -c 1 10.10.10.4
PING 10.10.10.4 (10.10.10.4) 56(84) bytes of data.
64 bytes from 10.10.10.4: icmp_seq=1 ttl=64 time=0.118 ms

--- 10.10.10.4 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.118/0.118/0.118/0.000 ms

[root@localhost ~]# ip netns exec ns2 ping -c 1 10.10.10.2
PING 10.10.10.2 (10.10.10.2) 56(84) bytes of data.
64 bytes from 10.10.10.2: icmp_seq=1 ttl=64 time=0.044 ms

--- 10.10.10.2 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.044/0.044/0.044/0.000 ms
[root@localhost ~]# ip netns exec ns2 ping -c 1 10.10.10.4
PING 10.10.10.4 (10.10.10.4) 56(84) bytes of data.
64 bytes from 10.10.10.4: icmp_seq=1 ttl=64 time=0.064 ms

--- 10.10.10.4 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.064/0.064/0.064/0.000 ms

[root@localhost ~]# ip netns exec ns3 ping -c 1 10.10.10.2
PING 10.10.10.2 (10.10.10.2) 56(84) bytes of data.
64 bytes from 10.10.10.2: icmp_seq=1 ttl=64 time=0.042 ms

--- 10.10.10.2 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.042/0.042/0.042/0.000 ms
[root@localhost ~]# ip netns exec ns3 ping -c 1 10.10.10.3
PING 10.10.10.3 (10.10.10.3) 56(84) bytes of data.
64 bytes from 10.10.10.3: icmp_seq=1 ttl=64 time=0.096 ms

--- 10.10.10.3 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.096/0.096/0.096/0.000 ms

清理测试用例

ip netns del ns1
ip netns del ns2
ip netns del ns3
ip l s br-test down
brctl delbr br-test

通过OVS相连

OVS是第三方开源的Bridge，功能比Linux Bridge要更强大

OVS有两种方案实现多命名空间网络互通，一种方式为veth-pair方式，类似Linux Bridge实现

另一种解决方案是使用openvswitch，并利用openvswitch的内部端口。 这避免了在所有其他解决方案中必须使用的veth对的使用

关于第二种方式实现

关闭selinux

setenforce 0
sed -i "s#SELINUX=enforcing#SELINUX=disabled#g" /etc/selinux/config

安装OVS编译依赖

yum install -y python-six selinux-policy-devel gcc make \
python-devel openssl-devel kernel-devel graphviz kernel-debug-devel autoconf \
automake rpm-build redhat-rpm-config libtool wget net-tools

编译安装OVS

mkdir -p ~/rpmbuild/SOURCES
tar -zxvf openvswitch-2.5.4.tar.gz
cp openvswitch-2.5.4.tar.gz ~/rpmbuild/SOURCES/
ls /lib/modules/$(uname -r) -ln
rpmbuild -bb --without check openvswitch-2.5.4/rhel/openvswitch.spec
cd rpmbuild/RPMS/x86_64/
yum localinstall -y openvswitch-2.5.4-1.x86_64.rpm
systemctl enable openvswitch.service
systemctl start openvswitch.service

创建net命名空间

ip netns add ns1
ip netns add ns2
ip netns add ns3

创建osv虚拟交换机

ovs-vsctl add-br ovs-br0

创建ovs port

#### PORT 1
# create an internal ovs port
ovs-vsctl add-port ovs-br0 tap1 -- set Interface tap1 type=internal
# attach it to namespace
ip link set tap1 netns ns1
# set the ports to up
ip netns exec ns1 ip link set dev tap1 up
#
#### PORT 2
# create an internal ovs port
ovs-vsctl add-port ovs-br0 tap2 -- set Interface tap2 type=internal
# attach it to namespace
ip link set tap2 netns ns2
# set the ports to up
ip netns exec ns2 ip link set dev tap2 up

#### PORT 3
# create an internal ovs port
ovs-vsctl add-port ovs-br0 tap3 -- set Interface tap3 type=internal
# attach it to namespace
ip link set tap3 netns ns3
# set the ports to up
ip netns exec ns3 ip link set dev tap3 up

配置ip并启用

ip netns exec ns1 ip a a 10.10.10.2/24 dev tap1
ip netns exec ns1 ip l s tap1 up

ip netns exec ns2 ip a a 10.10.10.3/24 dev tap2
ip netns exec ns2 ip l s tap2 up

ip netns exec ns3 ip a a 10.10.10.4/24 dev tap3
ip netns exec ns3 ip l s tap3 up

分别将三对veth-pair加入三个net命名空间和br-test

ip l s veth0 netns ns1
ip l s br-veth0 master br-test
ip l s br-veth0 up

ip l s veth1 netns ns2
ip l s br-veth1 master br-test
ip l s br-veth1 up

ip l s veth2 netns ns3
ip l s br-veth2 master br-test
ip l s br-veth2 up

互ping

[root@localhost ~]# ip netns exec ns1 ping -c 1 10.10.10.3
PING 10.10.10.3 (10.10.10.3) 56(84) bytes of data.
64 bytes from 10.10.10.3: icmp_seq=1 ttl=64 time=0.103 ms

--- 10.10.10.3 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.103/0.103/0.103/0.000 ms

[root@localhost ~]# ip netns exec ns1 ping -c 1 10.10.10.4
PING 10.10.10.4 (10.10.10.4) 56(84) bytes of data.
64 bytes from 10.10.10.4: icmp_seq=1 ttl=64 time=0.118 ms

--- 10.10.10.4 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.118/0.118/0.118/0.000 ms

[root@localhost ~]# ip netns exec ns2 ping -c 1 10.10.10.2
PING 10.10.10.2 (10.10.10.2) 56(84) bytes of data.
64 bytes from 10.10.10.2: icmp_seq=1 ttl=64 time=0.044 ms

--- 10.10.10.2 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.044/0.044/0.044/0.000 ms
[root@localhost ~]# ip netns exec ns2 ping -c 1 10.10.10.4
PING 10.10.10.4 (10.10.10.4) 56(84) bytes of data.
64 bytes from 10.10.10.4: icmp_seq=1 ttl=64 time=0.064 ms

--- 10.10.10.4 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.064/0.064/0.064/0.000 ms

[root@localhost ~]# ip netns exec ns3 ping -c 1 10.10.10.2
PING 10.10.10.2 (10.10.10.2) 56(84) bytes of data.
64 bytes from 10.10.10.2: icmp_seq=1 ttl=64 time=0.042 ms

--- 10.10.10.2 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.042/0.042/0.042/0.000 ms
[root@localhost ~]# ip netns exec ns3 ping -c 1 10.10.10.3
PING 10.10.10.3 (10.10.10.3) 56(84) bytes of data.
64 bytes from 10.10.10.3: icmp_seq=1 ttl=64 time=0.096 ms

--- 10.10.10.3 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.096/0.096/0.096/0.000 ms

清除测试用例

ip netns del ns1
ip netns del ns2
ip netns del ns3
ip l s ovs-br0 down
ovs-vsctl del-br ovs-br0

docker网络浅析

容器网络互通原理

启动测试容器

docker run -itd --name test1 busybox
docker run -itd --name test2 busybox

查看容器ip地址

[root@localhost ~]# docker exec test1 ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
4: eth0@if5: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue
    link/ether 02:42:ac:50:00:02 brd ff:ff:ff:ff:ff:ff
    inet 172.80.0.2/24 brd 172.80.0.255 scope global eth0
       valid_lft forever preferred_lft forever
[root@localhost ~]# docker exec test1 ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
4: eth0@if5: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue
    link/ether 02:42:ac:50:00:02 brd ff:ff:ff:ff:ff:ff
    inet 172.80.0.2/24 brd 172.80.0.255 scope global eth0
       valid_lft forever preferred_lft forever

互Ping

[root@localhost ~]# docker exec test2 ping -c 2 172.80.0.2
PING 172.80.0.2 (172.80.0.2): 56 data bytes
64 bytes from 172.80.0.2: seq=0 ttl=64 time=0.080 ms
64 bytes from 172.80.0.2: seq=1 ttl=64 time=0.086 ms

--- 172.80.0.2 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.080/0.083/0.086 ms
[root@localhost ~]# docker exec test1 ping -c 2 172.80.0.3
PING 172.80.0.3 (172.80.0.3): 56 data bytes
64 bytes from 172.80.0.3: seq=0 ttl=64 time=0.055 ms
64 bytes from 172.80.0.3: seq=1 ttl=64 time=0.153 ms

--- 172.80.0.3 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.055/0.104/0.153 ms

此时两个容器互通

ping内网其他主机

[root@localhost ~]# docker exec test1 ping -c 2 192.168.2.78
PING 192.168.2.78 (192.168.2.78): 56 data bytes
64 bytes from 192.168.2.78: seq=0 ttl=127 time=3.494 ms
64 bytes from 192.168.2.78: seq=1 ttl=127 time=3.007 ms

--- 192.168.2.78 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 3.007/3.250/3.494 ms
[root@localhost ~]# docker exec test2 ping -c 2 192.168.2.78
PING 192.168.2.78 (192.168.2.78): 56 data bytes
64 bytes from 192.168.2.78: seq=0 ttl=127 time=3.301 ms
64 bytes from 192.168.2.78: seq=1 ttl=127 time=3.442 ms

--- 192.168.2.78 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 3.301/3.371/3.442 ms

连通原理解析

其实原理也是类似于上一节所说。实际上就是新建了一对veth，将网络打通了。

  • 1、容器里能访问外网原理：是因为有一对veth,一端连着容器，一端连着主机的docker0， 这样容器就能共用主机的网络了，当容器访问外网时，就会通过NAT进行地址转换，实际是通过iptables来实现的。
  • 2、容器间互通原理：每个容器创建时会生成一对veth,一端连着容器，一端连着docker0网络，这样两个容器都连着docker0，他们就可以互相通信了。 docker0相当于上述的Linux Bridge

如图所示：

清理测试用例

docker rm -f test1
docker rm -f test2

网络隔离原理

创建测试网络

docker network create net-1
docker network create net-2

启动容器

docker run -itd --name test1 --network=net-1 busybox
docker run -itd --name test2 --network=net-2 busybox

查看IP

[root@localhost ~]# docker exec test1 ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
10: eth0@if11: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue
    link/ether 02:42:ac:50:01:02 brd ff:ff:ff:ff:ff:ff
    inet 172.80.1.2/24 brd 172.80.1.255 scope global eth0
       valid_lft forever preferred_lft forever
[root@localhost ~]# docker exec test2 ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
12: eth0@if13: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue
    link/ether 02:42:ac:50:02:02 brd ff:ff:ff:ff:ff:ff
    inet 172.80.2.2/24 brd 172.80.2.255 scope global eth0
       valid_lft forever preferred_lft forever

互Ping

[root@localhost ~]# docker exec test1 ping -c 2 -i 1 172.80.2.2
^C
[root@localhost ~]# docker exec test1 ping -c 2 -W 1 172.80.2.2
PING 172.80.2.2 (172.80.2.2): 56 data bytes

--- 172.80.2.2 ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss
[root@localhost ~]# docker exec test2 ping -c 2 -W 1 172.80.1.2
PING 172.80.1.2 (172.80.1.2): 56 data bytes

--- 172.80.1.2 ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss

由于归属不同网桥，网络不通

Ping外部主机

[root@localhost ~]# docker exec test2 ping -c 2 -W 1 192.168.2.78
PING 192.168.2.78 (192.168.2.78): 56 data bytes
64 bytes from 192.168.2.78: seq=0 ttl=127 time=3.282 ms
64 bytes from 192.168.2.78: seq=1 ttl=127 time=2.960 ms

--- 192.168.2.78 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 2.960/3.121/3.282 ms
[root@localhost ~]# docker exec test1 ping -c 2 -W 1 192.168.2.78
PING 192.168.2.78 (192.168.2.78): 56 data bytes
64 bytes from 192.168.2.78: seq=0 ttl=127 time=3.984 ms
64 bytes from 192.168.2.78: seq=1 ttl=127 time=3.429 ms

--- 192.168.2.78 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 3.429/3.706/3.984 ms

由此可见，通过不同网桥实现了网络隔离

清理测试用例

docker rm -f test1
docker rm -f test2

关于docker网络具体实现，这里不做过多讨论。

参考文献

Copyright © weiliang 2021 all right reserved，powered by Gitbook本书发布时间： 2024-04-22 16:03:41

results matching ""

    No results matching ""